Garage Door Stop

Made from Cellular PVC, our maintenance-free garage door stop adds design presence to garages entryways. Our patented Uniflex™ Garage Door Stop reduces the impact of the elements such as water, snow, dirt and bugs. 

Disclaimer: Colors shown online and in printed materials may vary from actual colors. Please review color fan decks or real product samples before making a final color selection.

About Garage Door Stops

Features

  • Made from 100% PVC for long-lasting performance
  • Seals out dirt, insects, wind, snow, and water for a cleaner, more efficient garage
  • Made in the USA
  • Improves energy efficiency by enhancing the garage door seal
  • Dent-resistant and tough enough for everyday wear

FAQs

What should I use to fill screw or nail holes and or cracks?

Open Accordion Menu Item

• Extreme Adhesives Fill & Flex®
• Dap® Platinum Patch®
• OSI QUADMAX
• Sashco Big Stretch High-Performance Elastic sealant
• Sherwin Williams Shrink Free Spackling®
• Crackshot High-Performance Spackling Paste 

Can you use standard woodworking material to cut PVC?

Open Accordion Menu Item

Yes – Typical wood working machinery, blades, bits, and cutter heads are perfect for fabricating PVC. All blades, cutter heads and bits must be sharp and undamaged for best results. Machinery must be in good working condition.

See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.

Do you have installation instruction videos?

Open Accordion Menu Item

We have many installation videos on YouTube. Please follow the link below:
https://www.youtube.com/c/WestlakeRoyalBuildingProducts.

How should I cut the trim and mouldings?

Open Accordion Menu Item

Royal Trim & Mouldings should be cut with a carbide tip blade with 80 teeth or more. It is important to make the cuts quickly. We also have found that you can lightly spray the blade with cooking spray or furniture polish as a lubricant to avoid excessive build up on the blade. NOTE: Do not spray the mouldings as this will affect paint adhesion.

See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.

This product is not available in your location
Please change or remove your location to view this product.