Outside Corner
Outside Corners are designed with appearance in mind. They provide a clean and finished edge where siding meets at external corners.
Disclaimer: Colors shown online and in printed materials may vary from actual colors. Please review color fan decks or real product samples before making a final color selection.
About Outside Corner
Features
- Installs easily with fasteners and glue
- Made from Cellular PVC that won’t rot or attract termites
- Low-maintenance and resistant to splitting and cracking
- Paintable with acrylic latex paint; use a vinyl-safe paint for darker colors
- Absorbs virtually no water for lasting durability
- Made in the USA
Resource Library
Explore our library of educational resources—including product literature, installation guidelines, technical documents, and more—to help guide every stage of your project.
Complete the Look
FAQs
What should I use to fill screw or nail holes and or cracks?
• Extreme Adhesives Fill & Flex®
• Dap® Platinum Patch®
• OSI QUADMAX
• Sashco Big Stretch High-Performance Elastic sealant
• Sherwin Williams Shrink Free Spackling®
• Crackshot High-Performance Spackling Paste
Does Skytrim require painting?
No, Skytrim Cellular PVC trim does not require painting but, like any Cellular PVC product, it will weather over time and painting will enhance these premium products to maintain color consistency over time. Our Cellular trim products are ready for painting and require very little preparation.
Painting with a good quality, vinyl safe 100% Acrylic Latex paint will further protect products to maintain color consistency for many years. There are several paint manufacturers that warranty their specific coating products on Cellular PVC trim and mouldings.
Our warranty does not cover painted finishes or coating applied to the product by the original purchaser or any third party. However, if the proper coatings are used, and the coating manufacturer’s instructions are followed, users will be successful. Adhesion can be improved through light scuff sanding.
Product should be cleaned with a mild detergent or denatured alcohol and soft clean rag or bristle brush.
How should I cut the trim and mouldings?
Kleer Trim & Mouldings should be cut with a carbide tip blade with 80 teeth or more. It is important to make the cuts quickly. We also have found that you can lightly spray the blade with cooking spray or furniture polish as a lubricant to avoid excessive build up on the blade. NOTE: Do not spray the mouldings as this will affect paint adhesion.
See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.
Can you use standard woodworking material to cut PVC?
Yes – Typical wood working machinery, blades, bits, and cutter heads are perfect for fabricating PVC. All blades, cutter heads and bits must be sharp and undamaged for best results. Machinery must be in good working condition.
See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.
Share