Garage Weather Stop
PVC mouldings excel in detail applications. Designed to seal gaps around garage doors, this component helps to keep out cold air, moisture, dirt, and insects.
Disclaimer: Colors shown online and in printed materials may vary from actual colors. Please review color fan decks or real product samples before making a final color selection.
About Garage Door Stops
Features
- Installs easily with fasteners and glue
- Made from Cellular PVC that won’t rot or attract termites
- Low-maintenance and resistant to splitting and cracking
- Improves energy efficiency by enhancing the garage door seal
- Dent resistant and tough enough for everyday wear
- Made in the USA
Resource Library
Explore our library of educational resources—including product literature, installation guidelines, technical documents, and more—to help guide every stage of your project.
FAQs
What should I use to fill screw or nail holes and or cracks?
• Extreme Adhesives Fill & Flex®
• Dap® Platinum Patch®
• OSI QUADMAX
• Sashco Big Stretch High-Performance Elastic sealant
• Sherwin Williams Shrink Free Spackling®
• Crackshot High-Performance Spackling Paste
Can you use standard woodworking material to cut PVC?
Yes – Typical wood working machinery, blades, bits, and cutter heads are perfect for fabricating PVC. All blades, cutter heads and bits must be sharp and undamaged for best results. Machinery must be in good working condition.
See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.
How do I clean Kleer Trim and Mouldings?
If dirty, clean with a soft brush and mild household cleaner. Stubborn stains may be removed with denatured alcohol
How should I cut the trim and mouldings?
Kleer Trim & Mouldings should be cut with a carbide tip blade with 80 teeth or more. It is important to make the cuts quickly. We also have found that you can lightly spray the blade with cooking spray or furniture polish as a lubricant to avoid excessive build up on the blade. NOTE: Do not spray the mouldings as this will affect paint adhesion.
See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.
Share