Dry Stack
An exceptionally efficient option that gives you the profile of intricately stacked natural stone in an easy-to-install panel form. No grouting small ledge stones or prolonged construction timelines required.
The product colors you see are as accurate as current photography and website or display techniques allow. We suggest visiting your nearest dealer to look at product samples before selecting colors.
Height 2" & 4" | Length 5" – 24" | Thickness 0.75” – 2”
Corner Returns Short 3” – 5” | Long 7” – 12.5”
0
Resources
Complete The Look
FAQs
What are the benefits of using manufactured stone?
Open Accordion Menu Item
Manufactured stone can enhance any project with the beautiful look of natural textures at approximately 1/2 the cost and weight of natural stone. The light weight properties of this material eliminates the need for footers, wall ties and lintels above openings. Installing manufactured stone veneer is also less labor-intensive and has lower scrap or waste than full bed natural stone.
What are the recommended methods of bonding adhered manufactured stone veneer?
Open Accordion Menu Item
Type S mortar complying with ASTM C270 has been commonly used to bond manufactured veneer products. For additional bond strength and other benefits the use of a Modified Mortar meeting ANSI A118.4 and/or ANSI A118.15 can be used. For applications over cement board a Modified Mortar must be used. Building codes are changing and in areas that have adopted the 2024 building code the use of Modified Mortars are required and the only option for setting mortar.
Can I install adhered manufactured stone veneer directly to cement board?
Open Accordion Menu Item
Yes, for exterior applications use only cement board that complies with ASTM C1325. For interior installations, any ½” or 5/8″ cement board product is acceptable. Always bond the stone with polymer modified mortar compliant with ANSI A118.4 or ANSI A118.15. Do not use conventional Type S mortar for bonding stone to cement board. Please consult cement board manufacturer for board installation, tape, anchor and other instructions.
For what applications should I avoid adhered manufactured stone veneer?
Open Accordion Menu Item
Adhered stone veneer is designed and intended as a wall covering. Using adhered stone veneer on a horizontally oriented fashion should only be done as an engineered system. Do not use adhered stone veneer as a paver or a wall cap. Do not install adhered stone in a situation in which continuous or frequent exposure to water is possible such as pool or Jacuzzi copings or surrounds. Adhered stone veneer is not intended to be installed on stair risers where deicing salts or snow shovels can damage the stone façade.
Similar Products
This product is not available in your location
Please change or remove your location to view this product.
Share