Base
Base moulding is a trim piece installed along the bottom of walls to cover the gap between the wall and floor. It provides a finished look to a room while also helping protect the walls from scuffs and damage.
About Base Moulding
Features
- Installs easily with fasteners and glue
- Made from Cellular PVC that won’t rot or attract termites
- Low-maintenance and resistant to splitting and cracking
- Paintable with acrylic latex paint; use a vinyl-safe paint for darker colors
- Absorbs virtually no water for lasting durability
- Made in the USA
Resources
Explore our library of educational resources—including product literature, installation guidelines, technical documents, and more—to help guide every stage of your project.
Complete the Look
FAQs
Yes – Typical wood working machinery, blades, bits, and cutter heads are perfect for fabricating PVC. All blades, cutter heads and bits must be sharp and undamaged for best results. Machinery must be in good working condition.
See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.
Nail holes may be filled with Kleer Nail Stick (if product is being painted), Kleer Structural Sealant or Kleer Cellular PVC Time Adhesive.
We have many installation videos on YouTube. Please follow the link below:
https://www.youtube.com/c/WestlakeRoyalBuildingProducts.
Royal Trim & Mouldings should be cut with a carbide tip blade with 80 teeth or more. It is important to make the cuts quickly. We also have found that you can lightly spray the blade with cooking spray or furniture polish as a lubricant to avoid excessive build up on the blade. NOTE: Do not spray the mouldings as this will affect paint adhesion.
See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.
