Window & Door Trim
Crafted from durable Cellular PVC, designed to add definition and dimension to exterior and interior trim. It's resistant to moisture, warping, and insects, making it a low-maintenance option for long-lasting architectural detail.
Disclaimer: Colors shown online and in printed materials may vary from actual colors. Please review color fan decks or real product samples before making a final color selection.
About Window & Door Trim
Features
- Installs easily with fasteners and glue
- Made from Cellular PVC that won’t rot or attract termites
- Low-maintenance and resistant to splitting and cracking
- Paintable with acrylic latex paint; use a vinyl-safe paint for darker colors
- Absorbs virtually no water for lasting durability
- Made in the USA
Resource Library
Explore our library of educational resources—including product literature, installation guidelines, technical documents, and more—to help guide every stage of your project.
Complete the Look
FAQs
For best results, use Cortex® fasteners and plugs. Standard nail guns also work with Skytrim products. Use a highly durable fastener such as hot dipped galvanized or stainless steel. Staples, small brads and wire nails must not be used.
Fasteners should be long enough to penetrate the solid wood substrate a minimum of 1-1/2". Skytrim should be fastened to a flat, solid substrate. Fastening Skytrim into hollow or uneven areas must be avoided.
Pre-drilling is not required when using Cortex fasteners or nails, unless the product is installed in low temperatures – typically 40°F (5° C) or lower.
We have many installation videos on YouTube. Please follow the link below:
https://www.youtube.com/c/WestlakeRoyalBuildingProducts.
If dirty, clean with a soft brush and mild household cleaner. Stubborn stains may be removed with denatured alcohol
Kleer Trim & Mouldings should be cut with a carbide tip blade with 80 teeth or more. It is important to make the cuts quickly. We also have found that you can lightly spray the blade with cooking spray or furniture polish as a lubricant to avoid excessive build up on the blade. NOTE: Do not spray the mouldings as this will affect paint adhesion.
See Technical bulletin Cutting, Routing, and Milling PVC for detailed instructions.
